Parkside PWSA 12-LI A1 User Manual

2 5
NI CYIEGB
Troubleshooting
Always unplug the shredder before working on it.
Risk of electric shock!
Problems Possible Cause Error correction
Device doesn‘t start
Mains voltage missing
Main circuit breaker is tripped
Check the socket, mains cable,
line, mains plug, repairs to be
carried out by qualied electri-
cian if necessary, check main
circuit breaker.
On/off switch (
5) may be
defective
Repair by Customer Care
Engine faulty
Grinding tool does
not move although
the engine is run-
ning
Grinding disc nut is loose
Tighten grinding disc nut (see
„Changing disc“)
Workpiece, remaining workpie-
ces or remaining grinding tools
block drive
Remove blockages
Engine is slower
and stops
Device is overloaded through
workpiece
Reduce pressure on grinding tool
Workpiece unsuitable
Grinding disc does
not rotate smoothly,
abnormal noises
can be heard
Grinding disc nut is loose
Tighten grinding disc nut (see
„Changing disc“)
Grinding disc is defective Change grinding disc

Parkside PWSA 12-LI A1 Specifications

General

Brand	Parkside
Model	PWSA 12-LI A1
Category	Grinder
Language	English