Parkside PWSA 12-LI A1 User Manual

5
NI CYIEGB
The tool should not be used in any other
application (e.g. cutting/grinding with
coolant solutions, cutting/grinding harmful
substances such as asbestos).
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use. The tool is to be used by
adults. Children over the age of 16 may
not use the tool except under supervision.
The manufacturer is not liable for damages
caused by an improper use or incorrect
operation of this device.
General description
See the front fold-out page for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the pa-
ckaging material correctly.
- Device
- Cutting disc (preassembled)
- Battery-charger
- Battery
- Hex key (4 mm)
- Storage case
- Instruction Manual
Description of functions
The cordless angle grinder is suitable for
cutting and grinding metal, stone and
wood materials, plastic, tiles and non-
ferrous metals. There is a special disc for
each of the separate applications. Please
refer to the information from the disc manu-
facturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Protective hood
2 Cutting disc
3 Clamping screw
4 Spindle stop button
5 On/off switch
6 Battery Indicator (3LEDs)
7 Handgrip
8 Battery release button
9 Battery
10 Storage case
11 Hex key
12 Charger power supply cord
13 Green LED
14 Red LED
15 Charger
16 Mounting ange
17 Clamping ange
Technical data
Cordless angle grinder
...............................PWSA 12-Li A1
Rated input voltage ......................12 V
Idling speed (n) .....................19500 min
-1
Dimensions of cutting/grinding disc
...................................... Ø 76 x 10 mm
Bore hole ................................ Ø 10 mm
Maximum diameter
Cutting/grinding disc ............... Ø 76 mm
Thickness of cutting/grinding discs
......................................... max. 6.5 mm
Grinding spindle thread ..................... M5
Protection category...........................IPX0
Sound pressure level
(L
pA
) ...................64.7 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .......... 75.7 dB(A); K
WA
= 3 dB
Vibration (a
h
) ...... 2.37 m/s
2
; K= 1.5 m/s
2

Parkside PWSA 12-LI A1 Specifications

General

Brand	Parkside
Model	PWSA 12-LI A1
Category	Grinder
Language	English