Parkside PWSAP 40-Li A1 User Manual

PWSAP 40-Li A1
■ 144
│
ES
Accesorios autorizados
Máx. diámetro Ø (mm)
Máx. grosor (mm)
Dimensiones de la rosca
(mm)
Máx. velocidad
(r.p.m.)
Máx. velocidad
periférica (m/s)
Herramienta
Cubierta de protección
Muelas de tronzar 230 3 M14 ≥ 6000 ≥ 73
Llave de montaje
con dos orificios 7
Sí
Muelas de desbaste 230 8 M14 ≥ 6000 ≥ 73
Llave de montaje
con dos orificios 7
Sí
instruidos correctamente sobre el
uso seguro del aparato y hayan
comprendido los peligros que
entraña. Los niños no deben
jugar con el aparato. Los niños
no deben realizar las tareas de
limpieza y mantenimiento del
aparato sin supervisión.
■ Si se estropea el cable de co-
nexión de red de este aparato,
encomiende su sustitución al
fabricante, a su servicio de asis-
tencia técnica o a una persona
que posea una cualificación
similar para evitar peligros.
El cargador solo es apto para su uso en
interiores.
¡ADVERTENCIA!
■ Si se estropea el cable de conexión de red
de este aparato, encomiende su sustitución al
fabricante, a su servicio de asistencia técnica
o a una persona que posea una cualificación
similar para evitar peligros.
¡ATENCIÓN!
♦ Este cargador solo puede cargar las si-
guientes baterías: PAP20A1/PAP20A2/
PAP20A3/PAP20B1/PAP20B3/
PAPS204A1/PAPS208A1.
♦ Encontrará la lista actual de baterías compa-
tibles en www.Lidl.de/Akku.
Almacenamiento y manipulación
delas herramientas intercambiables
recomendadas
■ Las herramientas abrasivas deben manejarse y
transportarse con cuidado.
■ Las herramientas abrasivas deben almacenarse
de forma que no se sometan a daños mecánicos
ni al efecto de las condiciones climáticas (p.
ej.,humedad).

Parkside PWSAP 40-Li A1 Specifications

General

Battery Voltage	40 V
Disc Diameter	125 mm
No-load Speed	8500 rpm
Spindle lock	Yes
Battery Type	Li-Ion

Summary

Introduction and Overview

Intended Use

Specifies the tool's intended applications and operational limitations.

Equipment and Package Contents

Lists all components included with the tool and its accessories.

Technical Specifications

Provides detailed technical data for the grinder, battery, and charger.

Explanation of Symbols

Defines the meaning of various symbols used in the manual for clarity.

General Safety Warnings

Work Area and Electrical Safety

Safety guidelines for the workspace and electrical connections during operation.

Personal Safety Measures

Advice on operator safety, protective gear, and common sense during use.

Tool Usage and Care Guidelines

Best practices for operating and maintaining the power tool to ensure safety.

Battery Tool Safety and Care

Instructions for the safe use and maintenance of battery packs.

Service and Maintenance Information

Guidance on servicing, repairs, and general tool maintenance procedures.

Application-Specific Safety Instructions

Grinding and Abrasive Cutting Safety

Critical safety rules specifically for grinding and abrasive cutting tasks.

Kickback Prevention and Response

Guidance on preventing kickbacks and safe handling during unexpected reactions.

Advanced Abrasive Cutting Safety

Additional safety precautions for abrasive cutting operations.

Battery Charger Safety Guidelines

Essential safety rules for operating the battery charger.

Accessories and Operational Procedures

Permissible Accessories and Storage

Details on approved accessories and best practices for their storage.

General Working Procedures

Overview of how to operate the angle grinder effectively and safely.

Rough Grinding Techniques

Step-by-step instructions for performing rough grinding operations.

Abrasive Cutting Techniques

Step-by-step instructions for performing abrasive cutting operations.

Powering Up and Battery Management

Procedures for switching the tool on/off and managing the battery.

Guard and Disc Installation Steps

Instructions for fitting the blade guard and changing cutting/roughing discs.

Additional Handle Installation

Guidance on fitting the additional handle for improved control and safety.

Maintenance, Disposal, and Warranty Information

Maintenance and Cleaning Instructions

Guidelines for keeping the tool clean and in optimal working condition.

Proper Disposal Procedures

Environmentally conscious methods for disposing of the tool and batteries.

Warranty Terms and Conditions

Details the warranty period, coverage, and exclusions.

Warranty Claim Process

How to submit a warranty claim, including required documentation.

Service Contacts and Importer Details

Contact information for service, warranty claims, and the importer.

Original Declaration of Conformity

Official statement confirming product compliance with EU directives and standards.

Ordering Replacement Batteries

Information on how to order replacement batteries for the tool.