24
Configuring CRE to Prompt for Tip Immediately After Sale
Note: The PAX PX7 device will prompt for Tip during the sale. Prompt tip feature must be enabled on the processor’s
side as well. This feature is only available for CRE version 13.xxx and higher. Must configure this feature when there
aren’t any invoices open. (Perform a settlement before configuring). Can’t be combine with the Bar Tab feature.
1. From the Options/Manager screen,
select Setup > Setup Screen.
2. Select Payment Processing
3. Select the Tips Tab. Make sure tips on
Completed invoices is selected.
4. Select the Prompt For Tip Immediately
After Sale feature.
5. Select Update.
Note: Restart CRE after changes are saved.
Option only available when Bar Tab options
are turned off.
To Next Page
Loading...
Need help?
General
