peplink Pepwave MAX Series User Manual

Interface access
TCP 443
HTTPS traffic
Web Admin
Interface access
(secure)
Inbound
Enabled
TCP 8822
SSH
SSH
Inbound
Disabled
UDP 161
SNMP Get
SNMP monitoring
Inbound
Disabled
UDP 162
SNMP Trap
SNMP monitoring
Outbound
Disabled
TCP, UDP 1812
Radius Authentication
Radius
Outbound
Disabled
TCP, UDP 1813
Radius Accounting
Radius
Outbound
Disabled
UDP 123
Network Time Protocol
NTP
Inbound
Outbound
Disabled
Enabled
TCP 60660
Real-time location data in
NMEA format
GPS
Outbound
Disabled
Disclaimer:
● By default, only TCP 32015 and UDP 4500 are needed for PepVPN / SpeedFusion.
● Inbound / Outbound* - Inbound = For Server mode; Outbound = For Client mode
● UDP 32015 º - If IPsec VPN or L2TP/IPsec RUA is enabled, the UDP 4500 is occupied, so
PepVPN / SpeedFusion will automatically switch to UPD 32015 as VPN data port .
● UDP 32015+N-1^ / TCP/UDP 4500+N-1^ - When using Sub-Tunnels, multiple ports are in use (1
for each Sub-Tunnel profile).
● The default UDP data ports used when using (N number of Sub-Tunnel profiles) are:
4500…4500+N-1, or (when port 4500 is in use by IPsec or L2TP/IPsec) 32015… 32015+N-1".
https://www.peplink.com
314
Copyright @ 2021 Peplink

peplink Pepwave MAX Series Specifications

General

Brand	peplink
Model	Pepwave MAX Series
Category	Wireless Router
Language	English