173
In the event of a breakdown
8
3. Reversing lamps (W16W)
Brake lamps / sidelamps / reversing
lamps and direction indicators
Rapid ashing of a direction indicator
lamp (left or right) indicates that one of
the bulbs on the corresponding side has
failed.
Amber coloured bulbs, such as the
direction indicators, must be replaced by
bulbs with identical colour and specications.
These bulbs are changed from inside the boot.
► Open the boot.
► Remove the access ap on the
corresponding side trim, so that the lamp unit
xing can be accessed.
► Slacken the xing nut with a socket wrench.
► Finish slackening it by hand to recover the
nut, making sure that it does not fall.
► Push the retaining clip outwards and remove
the lamp unit from the back.
► Unclip the four xings around the bulb holder.
► Remove the bulb holder.
Once the lamp unit and the bulb holder are
removed:
1. Brake lamps/sidelamps
2. Direction indicators
3. Reversing lamps
► Turn the bulb 1 or 2 a quarter turn to the left
and remove it.
► Pull the bulb 3 to remove it.
► Replace the bulb.
Engage the lamp unit in its guides while
keeping it in line with the centreline of the
vehicle.
Tighten without forcing to guarantee correct
sealing and to avoid damaging the lamp unit.
Foglamp (P21W)
For access, pass your hand under the bumper
on the left-hand side.
► Turn the bulb holder a quarter turn to the left
and pull it out.
► Turn the bulb a quarter turn to the left and
pull it out.
► Change the bulb.
Changing a fuse
Accessing the tools
The extraction tweezers are located behind the
fusebox cover.
Depending on version:
To Next Page
Loading...
Need help?
General
