3:2
A
B
C
Sewing functions
Stitch selection
There are three ways of selecting your desired stitch:
1. With the selection button: for scrolling back ward and
forward in the stitches.
> in ascending order
< in descending order
If you are in the last stitch, No. 46, and continue to scroll
you will return to stitch No. 0.
2. With the direct selection buttons for instant selection of
the most commonly used stitches (0 - 9).
3. With the direct selection buttons to choose the stitch
number. To select program No. 23, press button 2
then press button 3. The stitch number appears in the
expression window.
Altering stitches
Adjust the length, width, balance, density or needle position
of stitches by touching the appropriate -/+ buttons to the
right of the window. Each change is visible in the window.
Stitch width
Pattern width
Needle position for straight stitches A
Stitch length
Pattern length B
Stitch density
Pattern density
Balance C
To change: Use -/+ buttons:
If you tap on your foot control while sewing, the needle
can be raised or lowered. This does not change the pre-set
needle stop position
To Next Page
Loading...
Need help?
General
