5:3
Buttonholes
Fully automatic buttonhole
Fully automatic buttonholes are accomplished by pressing
button 9. Adjust the size of the buttonhole by using the -/+
button B. You can also adjust the buttonhole width (-/+
button A) and the buttonhole density (-/+ button C). Sew
as many buttonholes as you wish. Your expression will
continue to sew the same size buttonhole until you make
adjustments.
Semi-automatic buttonhole
You can also À nish a buttonhole manually by pressing the
”reverse sewing” button one time after the À rst bartack is
sewn. This will allow you to place the last or back bartack
where you want it.
The word “man” appears in the expression window, after
you have touched reverse. This indicates a manual À nish
of the buttonhole is desired. Before the left side of the
buttonhole ends, the machine will slow down. When the left
side of the buttonhole is the same length as the right side of
the buttonhole press the “reverse sewing” button (16) once
again.
To Next Page
Loading...
Need help?
General
