4:3
1 - 2.5 3-5 0 1 - 3 3-5 4
Utility stitches
Straight stitch
Stitch 1 is the basic straight stitch in center needle position.
The stitch length can be increased up to 6 mm. Change the
needle position of the straight stitch to sew in a zipper or
topstitch along the edge of a collar. The expression 2026
have 13 needle positions that can be adjusted with the -/+
button A.
Sewing in zippers
There are different ways to sew in zippers. Follow the
directions included with your pattern for best results.
For all types of zippers it is important to sew close to the
teeth of the zipper. The zipper foot can be snapped to the
presser foot ankle on the left or right, depending on how
you will insert your zipper. Then set the needle position so
that it enters close to the edge of the zipper teeth by using
one of the 13 needle positions available. If the presser foot is
attached on the right side, the needle must only be moved to
the right. If the foot is attached on the left, the needle must
only be moved to the left.
Stitch Stitch
To Next Page
Loading...
Need help?
General
