9
A
B
C
Preparations
Unpacking
3ODFHWKHER[RQDVWHDG\ÁDWVXUIDFH/LIW
the machine out of the box, remove the outer
packaging and lift off the machine carrying
case.
2. Remove all outer packing material and the
plastic bag.
Note: Your PFAFF® passport™ sewing machine is
adjusted to provide the best stitch result at normal room
temperature. Extreme hot and cold temperatures can
affect the sewn result.
&RQQHFWWRWKHSRZHUVXSSO\
$PRQJWKHDFFHVVRULHV\RXZLOOÀQGWKHSRZHU
cord and the foot control.
1RWH&RQVXOWDTXDOLÀHGHOHFWULFLDQLILQGRXEWDVWR
how to connect the machine to the power source. Unplug
the power cord when the machine is not in use.
For this sewing machine, foot control model C-9002
manufactured by CHIENHUNG TAIWAN., LTD
must be used.
1. Connect the foot control cord to the front
socket on the bottom right side of the machine
(A).
2. Connect the power cord to the rear socket on
the bottom right side of the machine (B). Plug
the cord into the wall socket.
3. Press the ON/OFF switch to ON to turn on
power and light (C).
3DFNDZD\DIWHUVHZLQJ
1. Switch the main switch off.
Note: After switching off, residual power may still
remain in the machine. This may cause the light to stay
on for a few seconds while the power is consumed. This
LVQRUPDOEHKDYLRUIRUDQHQHUJ\HIÀFLHQWDSSOLDQFH
2. Unplug the cord from the wall socket and then
from the machine.
3. Unplug the foot control cord from the machine.
Wind the cord around the foot control for easy
storage.
4. Place all accessories in the accessory tray. Slide
the tray on to the machine around the free arm.
5. Place the foot control in the space above the
free arm.
6. Put on the hard cover.
For the USA and Canada
This sewing machine has a polarized plug (one
blade wider than the other). To reduce the risk
RIHOHFWULFVKRFNWKLVSOXJLVLQWHQGHGWRÀWLQD
polarized outlet only one way. If the plug does
QRWÀWIXOO\LQWKHRXWOHWUHYHUVHWKHSOXJ,ILW
VWLOOGRHVQRWÀWFRQWDFWDTXDOLÀHGHOHFWULFLDQWR
install the proper outlet. Do not modify the plug
in any way.
To Next Page
Loading...
Need help?
General
