20
A
B
Warning messages/sound
Main motor overloaded
Your sewing machine can get overloaded when
sewing on heavy fabrics e.g,. the thread gets
twisted or jammed or the hand wheel axle cannot
move. A monotone beep sound is heard and
WKHOHWWHUV(/ÁDVKRQWKH/('GLVSOD\3OHDVH
UHIHUWRWKHWURXEOHVKRRWLQJRQSDJHWRÀQGD
recommended solution. When the problem has
been solved, the machine will continue to sew.
Note: When sewing, if the thread gets jammed inside
the hook preventing the needle from moving and you
continue pressing the foot control, the security switch
will stop the machine completely. Restart the sewing
machine by switching the ON/OFF switch to the OFF
position and then ON again.
Note: If the problem is still not solved, please contact
your local authorized PFAFF® dealer.
Bobbin winding position
When the bobbin lever is pushed to the right, the
OHWWHUV63ÁDVKRQWKH/('GLVSOD\
If you press any button, a beep will inform you to
push the bobbin winder spindle to the left, sewing
position.
Note: You cannot sew in bobbin winding position.
Machine sound
It is possible to turn off the sound on the machine
buttons. Press the immediate tie-off button (A)
while turning on the machine.
Select between the audio on or off by touching the
stitch width “+” or “–” buttons (B).
Touch “-” to turn off the audio and the display will
show “0”. Touch “+” to turn on the audio and the
display will show “1”.
Press the immediate tie-off button again to return
to sewing mode.
To Next Page
Loading...
Need help?
General
