GB
Worm gear screw jack SHE type1 and type2
High-performance screw jack HSE type1 and type2
T13.01.000.0000.0003
2019/04 Rev. Index E
Subject to technical modifications Design changes under reserve Sous réserve de modifications techniques !
5
1.2.1 Marking in accordance with RL 2014/34/EC
Gas
II 2G ck Ex h IIB T4 Gb U
Dust
II
2D c Ex h IIIB
135°C
Db U
Ex-Symbol
Device group
Category
Ignition protection type
Equipment protection level (EPL)
Explosion group
Temperature class
Max. surface temperature
Equipment protection level
Equipment with partial certifikate,
CE Compliance is certified with Installation in a complete Equipment
2 Accident prevention guide
Observe the relevant instructions, regulations, and standards in the country of use. In Germany, these are
currently:
Rules and regulations
EC machinery directive 2006/42/EC
Machine safety DIN EN ISO 12100:2010
Lift devices DIN EN 1494:2009-05
Lifting tables DIN EN 1570-1:2015-01
Elevating work platforms DIN EN 280:2014-02
Loading platforms DINEN 1756
Vehicle lifts DIN EN 1493:2011-02
Stages and studios BGV C1
Stage mechanics, safety equipment DIN 56950-1:2012-05
EC guideline; Equipment and protective systems in potetially
explosive atmospheres (ATEX)
2014/34/EU
EC guideline; Improving the safety and health protection in
potentially explosive atmospheres
1999/92/EG (ATEX 137)
Explosion protection basics and methodology DIN EN 1127-1
Non-electric devices for use in explosive-atmosphere zones -
basics and requirements
DIN EN ISO 80079-36
Non-electric devices for use in explosive-atmosphere zones -
protection through constructional safety “c”, ignition source
monitoring "b"; liquid encapsulation “k”
DIN EN ISO 80079-37
Explosive atmosphere DIN EN 60079-0
Explosive atmosphere, projection, selection and set-up of
electrical systems
DIN EN 60079-14
To Next Page
Loading...
Need help?
General
