Smart Card
Digital TV operators provide a CI+ module (Conditional
Access Module - CAM) and an accompanying smart card,
when you subscribe to their premium programmes.
Insert the smart card into the CAM module. See the
instruction you received from the operator.
To insert the CAM in the TV…
1. Look on the CAM for the correct method of insertion.
Incorrect insertion can damage the CAM and TV.
2. While looking at the back of the TV, with the front of
the CAM facing towards you, gently insert the CAM into
the slot COMMON INTERFACE.
3. Push the CAM in as far as it will go. Leave it in the slot
permanently.
When you switch on the TV, it may take a few minutes
before the CAM is activated. If a CAM is inserted and
subscription fees are paid (subscription methods can
differ), you can watch the scrambled channels supported
by the CAM smart card.
The CAM and smart card are exclusively for your TV. If
you remove the CAM, you will no longer be able to
watch the scrambled channels supported by the CAM.
Set Passwords and PIN Codes
For some CAMs, you must enter a PIN code to watch its
channels. When you set the PIN code for the CAM, we
recommend you to use the same code you are using to
unlock the TV.
To set the PIN code for the CAM…
1. Press
SOURCES.
2. Select the channel type you are using the CAM for.
3. Press OPTIONS and select Common Interface.
4. Select the TV operator of the CAM. The following
screens come from the TV operator. Follow the on-screen
instruction to look up the PIN code setting.
USB Flash Drive
You can view photos or play your music and videos from
a connected USB flash drive. Insert a USB flash drive in
one of the USB connections on the TV while the TV is
switched on.
The TV detects the flash drive and opens a list showing
its content.
If the contents list does not appear automatically,
press
SOURCES and select USB.
For more information on watching or playing content
from a USB flash drive, in Help, press the colour
key Keywords and look up Photos, Videos and
Music.
5.8. Bluetooth®
What You Need
You can connect a wireless device with Bluetooth® to
this TV – a wireless speaker or headphones.
To play the TV sound on a wireless speaker, you must
pair the wireless speaker with the TV. The TV can only
play the sound on one speaker at a time.
Attention - Audio to Video synchronisation
Many Bluetooth® speaker systems have a high, so called,
'latency'. High latency means that the audio lags behind
the video, causing unsynchronised 'lip sync'. Before you
purchase a wireless Bluetooth® speaker system, inform
yourself about the newest models and look for a device
with a low latency rating. Ask your dealer for advice.
17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
