Unpacking
It is recommended that two or more people remove the TV set from
the box. Be careful not to injure your fingers and keep children away
during assembly.
1
Open the top flaps of the box.
2
Remove all accessories.
3
Prepare a table and cover the top of it with a table cloth, blanket
or such to avoid damage to the TV set. Support both sides of the
TV set and, move it onto the table.
4
Carefully lay the TV set, with the screen side down, on the table
so as not to deform or damage Decoration plate of the bottom
of the unit.
Chin
Installing the stands
1
Remove the tape on the bottom of the TV set and the plastic bag.
Caution(s)
●
To avoid damage, prevent the chin and the screen from contacting the work
table.
Chin
2
Fasten the stand to the TV with 4 screws (2 screws for
43PFL5704 / 43PFL5604).
While fastening the screws, hold the stand to prevent it from
falling
×4*
* 2 screws for 43PFL5704 / 43PFL5604
3
Both stands should now be securely fastened.
Note(s)
●
A wide open space is recommended for assembly.
●
A Phillips-head screwdriver is required to fasten the stands to the TV set.
●
When attaching the stand, ensure that all screws are tightly fastened. If the
stand is not properly attached, it could cause the unit to fall, resulting in
injuries as well as damage to the unit.
●
To remove the stand from this unit, unscrew the phillips-head screws by
reversing the procedure. Be careful not to drop the stand when you remove
it.
9 .English
Continued on next page.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
