11
Sources
11.1
Switch to a device
From the list of Sources, you can switch to any of the
connected devices. You can switch to a tuner to
watch TV or switch to your connected devices to
watch their program, a digital receiver or a Blu-ray
Disc player.
To switch to a connected device…
1 - Press SOURCES to open the Sources menu.
2 - Select one of the items in the source list and
press OK. The TV will show the program or content of
the device.
One Touch Play
With the TV in standby, you can turn on a disc player
with your TV remote control.
To turn on both disc player and TV from standby and
start playing the disc immediately, press Play on the
TV remote control. The device must be connected
with an HDMI cable and both TV and device must
have HDMI CEC switched on.
30
To Next Page
Loading...
Need help?
General