support the Ambilight function.
Storage
Check the device storage.
Home Screen
Customize the home screen. You can enable or
disable the video and audio previews. Reorder the
apps and games. Read the Open-source licenses.
Retail Mode
Switch On or Off the retail mode. If you set the retail
mode to on. You can set the retail message type and
demo.
Google Assistant
Adjust the settings for Google Assistant. You can also
view the Open-source licenses.
Chromecast built-in
Adjust the settings for Chromecast built-in. You can
view the Open-source licenses and the version
number.
Screen Saver
Adjust the screen saver setting for your preference.
Location
Set the location status.
Usage & Diagnostics
Set to on for automatically send diagnostic
information to Google, such as crash reports and
usage data from your device, apps and Chromecast
built in.
Accessibility
Activate special functions for hearing and visually
impaired people.
Reboot
Reboot your TV for better performance when needed.
Remote and Accessories
Home > Settings > Remote and Accessories.
You can select the stored Bluetooth® connection
from the list.
If you cannot find your accessory, select Add
accessory to search for Bluetooth® connections.
12.7
Reboot
Home > Settings > Device Preferences > Reboot.
Note:
• Disconnect the external USB hard disc before
rebooting.
• Wait for few seconds, the TV restarts automatically.
This will remove unnecessary data and information in
the memory.
If your TV runs low performance when using Apps,
such as the video and audio are not synchronized or
the App is running slow, reboot your TV for better
performance.
12.8
Factory Reset
Reset all settings value to original TV settings
Home > Settings > Device Preferences > About >
Factory reset.
This will erase all data from your device's internal
storage, including: your Google account, system app
data, download apps and settings. All settings will be
reset and installed channels will be erased.
12.9
Clock and Language Settings
Menu Language
Change the language of the TV menu
Home > Settings > Device
Preferences > Language.
1 - Press Home to go to Home screen.
2 - Select Device Preferences > Language.
3 - Select your language and press OK.
4 - Press Back or EXIT repeatedly to close the
menu.
35
To Next Page
Loading...
Need help?
General