the TV screen back on, press any key on the remote
control.
Set TV switch off timer
Power > Switch off timer.
Select Switch off timer, the TV switches off
automatically at a preset time to save energy. The
timer will not stop unless the setting is changed to
Off.
No Signal Auto Power Off
Power > No signal auto power off.
Press Navigation keys up or down to set the
value. Select Off to deactivate the automatic turn off.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to Off.
Set auto sleep timer
Power > Auto sleep.
The TV switches to standby mode automatically after
a preset time if the TV does not receive any command
from the remote control.
12.5
Advanced Options
Audio
Set the audio language
MENU > TV options > Advanced Options > Audio
Language.
The TV channels can broadcast audio with several
spoken languages for a program. You can set a
preferred audio language. If audio in one of these
languages is available, the TV will switch to this audio.
MTS
MENU > TV options > Advanced Options > MTS.
You can switch the sound of an analog channel to
Mono, SAP or Stereo.
* Note: MTS is for analog channel only.
12.6
Other settings
Device Preferences
Home > Settings > Device Preferences.
System Update
Update TV software from local update or from the
Internet.
About
To show the information about this TV or perform
Factory reset operation for the TV.
Date & Time
Adjust the date and time settings.
Timer
Set TV switch on or off timer.
Language
Set or change the menu language.
Keyboard
Set the on-screen keyboard type.
Inputs
Rename the Inputs name and adjust the settings for
Consumer Electronic Control (CEC).
Power
Set the timers for saving energy.
Picture
Adjust the picture settings.
Sound
Adjust the sound settings.
Ambilight
Adjust the Ambilight settings.
* The Ambilight setting is only for models which
34
To Next Page
Loading...
Need help?
General