12.3
Power Settings
MENU > TV options > Power.
Set Sleep timer
Power > Sleep timer.
TV switches to standby mode automatically after a
preset time.
Set screen off to save energy consumption
Power > Picture off.
Select Picture off, the TV screen is switched off, to
switch the TV screen back on, press any key on the
remote control.
Set TV switch off timer
Power > Switch off timer.
Select Switch off timer, the TV switches off
automatically at a preset time to save energy.
No signal auto power off
Power > No signal auto power off.
Press Navigation keys up or down to set the
value. Select Off to deactivate the automatic switch
off.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to Off.
Set auto sleep timer
Power > Auto sleep.
TV switches to sleep mode automatically after a
preset time if the TV does not receive any command
from remote control.
Switch On/Off the light sensor
Power > Light sensor.
Select On to adjust the picture settings
automatically to the lighting conditions of the room.
12.4
Advanced Options
Audio
Set audio preference language
MENU > TV options > Advanced Options > Audio
Language/Primary Audio/Secondary Audio or Audio
Channel.
The TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to this audio.
Blue Mute
MENU > TV options > Advanced Options > Blue
Mute.
Switch the blue mute on or off.
Interaction Channel
MENU > TV options > Advanced Options >
Interaction Channel.
Switch the interaction channel on or off. Interaction
channel provides interactive services from
broadcaster via broadcast transmission or IP
connection.
MHEG PIN Protection
MENU > TV options > Advanced Options > MHEG
PIN Protection.
Set to turn on or off the Pin protection of MHEG
feature. If it is turned on, a PIN dialogue will ask to
enter the PIN code before starting the service.
HBBTV Settings
MENU > TV options > Advanced
Options > HBBTV settings.
Switch on HbbTV
HBBTV settings > On.
Set the HbbTV History Tracking
HBBTV settings > Do Not Track.
Set the options according to your preference.
32
To Next Page
Loading...
Need help?
General
