Philips EasyKey 6000 Series User Manual

14
3
4
2
Delete all keytags
Press [#], enter master PIN code and conrm
with [#].
Press [3] to enter the deletion of user
information and enter [4] to enter the
deletion of keytag, then enter [2] to delete
all keytags. After hearing a voice prompt
of “Succeeded", keep pressing [*] until you
nally exit the master mode.
System initialization
Remove the battery cover, then double
press the [RES] hole with a sharp
object. When you hear a voice prompt
of “Restoring to default settings", it
means that all user information is emptied.
4
or
2
1
1
Language settings
Press [#], enter master PIN code and conrm
with [#].
Press [4] to enter system settings, then press
[1] to enter language settings.
For Chinese, press [1]; For English, press [2];
For Spanish, press [3]; For Russian, press [4];
For Arabic, press [5]. After hearing a voice
prompt of ”Succeeded”, press [*] until you
nally exit the master mode.
The default language is English.
Attention
24
3
or or
2
1
Volume settings
Press [#], enter master PIN code and conrm
with [#].
Press [4] to enter system settings, then press
[2] to enter volume settings.
Choose the volume as needed: For
high volume, press [1]; for low volume,
press [2]; for mute mode, press [3].
After hearing a voice prompt of
“Succeeded”, keep pressing [*] until you
nally exit the master mode.
The default volume is “high volume”.
Attention
System settings

Philips EasyKey 6000 Series Specifications

General

Brand	Philips
Model	EasyKey 6000 Series
Category	Door locks
Language	English