Philips EasyKey 7300 User Manual

12
Press [#], enter master PIN code and
conrm with [#].
Place your nger against the sensor. After
hearing a voice prompt of “Take away
your nger and enroll again”, please take
away your nger and re-place it against
the sensor. After hearing a voice prompt
of “Succeeded”, press [*] several times
until you exit master mode.
Press [2] to enter user settings, then press [3]
to enter fingerprint registration. The system
will automatically number the fingerprint and
broadcast the number.
2
3
Register a ngerprint
2
4
Press [#], enter master PIN code and
conrm with [#].
Press [2] to add a new user, then press
[4] to enter card registration. The system
will automatically number the card and
broadcast the number.
Hold the card close to the card reader
until you hear a beep. After hearing a
voice prompt of “Succeeded”, press [*]
several times until you exit master mode.
Register a card
User Information
Deletion
Delete a user PIN code
Press [3] to enter user deletion, then press [1] to
enter user PIN code deletion. Press [1] again to
delete a single user PIN code.
Press [#], enter master PIN code and
conrm with [#].
1 13
Enter the 2-digit [user number] (00-09)
of the user PIN code that is to be deleted
and press [#] to conrm. After hearing a
voice prompt of “Succeeded”, press [*]
several times until you exit master mode.
1
3
2
Delete all user PIN codes
Press [#], enter master PIN code and
conrm with [#].
Press [3] to enter user deletion, then press [1] to
enter user PIN code deletion. Press [2] to delete
all user PIN codes. After hearing a voice prompt
of "Succeeded", press [*] several times until you
exit master mode.
3
删除一次性用户密码
2
Delete a one-time user PIN code
Press [#], enter master PIN code and
conrm with [#].
Press [3] to enter user deletion, then
press [2] to enter one-time user PIN
code deletion.

Philips EasyKey 7300 Specifications

General

Brand	Philips
Model	EasyKey 7300
Category	Door locks
Language	English