EasyManuals Logo

Philips EverFlo User Manual

Philips EverFlo
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
4
EverFlo / EverFlo Q User Manual
How to Contact Philips Respironics
To have your device serviced, contact your equipment provider. If you need to contact Philips Respironics directly,
call the Customer Service department at +1-724-387-4000 or +49 8152 93060. You can also use one of the
following addresses:
Respironics Inc.
10
01 Murry Ridge Lane
Murr
ysville, PA 15668 USA
Respironics Deutschland GmbH & Co. KG
Gewerbestrasse 17
82211 Herrsching, Germany
Chapter 1: Introduction
Your health care professional has determined that supplemental oxygen is of benet to you and has prescribed an
oxygen concentrator set at a specic ow setting to meet your needs. DO NOT change the ow settings unless your
health care professional tells you to do so. Please read and understand this entire manual before using the device.
Intended Use
The EverFlo / EverFlo Q Oxygen Concentrator is intended to provide supplemental oxygen to persons requiring
oxygen therapy. The device is not intended to be life supporting or life sustaining.
The device is for use in the home or hospital/institutional environment.
About Your EverFlo / EverFlo Q
The device produces concentrated oxygen from room air for delivery to a patient requiring low ow oxygen
therapy. The oxygen from the air is concentrated using a molecular sieve and a pressure swing adsorption process.
Your home care provider will show you how to operate the concentrator and will be available to answer any
questions. If you have additional questions or problems, contact your home care provider.
Parts of Your Concentrator
Control Panel
On/O Switch
Flow Meter
Oxygen Outlet
Port
Humidier Bottle
Mounting Strap
Humidier
Connector
Tube
Filter Door
Air Inlet Filter

Other manuals for Philips EverFlo

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips EverFlo and is the answer not in the manual?

Philips EverFlo Specifications

General IconGeneral
Oxygen Concentration93% (+/- 3%)
Weight14 kg (31 lbs)
Input Frequency60 Hz
Outlet Pressure5.5 PSI
Operating Temperature12°C to 32°C (55°F to 90°F)
Flow Rate0.5 to 5 L/min
Sound Level45 dBA (typical)
Input Voltage120 VAC
Operating HumidityUp to 95% non-condensing
Dimensions58.4 cm x 38.1 cm x 24.1 cm (23 in x 15 in x 9.5 in)

Related product manuals