Selecting the right light intensity
Lumea provides 5 dierent light intensities. Depending on your skin type
and the light intensity level you nd comfortable, you can select the right
light intensity setting.
1 Consult the table below to select the right setting.
2 To adjust the light intensity setting, press the on/o button one or more
times until you have reached the required setting. The corresponding
intensity light lights up white.
Note: The device automatically disables when your skin tone is too dark,
to prevent you from developing skin reactions. The integrated skin tone
sensor does not tell you which light intensity setting to use, as Philips
Lumea gives you the freedom to select the light intensity that you nd
most convenient.
3 Lumea should never be painful. If you experience discomfort, reduce the
light intensity setting.
4 After recent tanning, perform a skin test to determine the right light
intensity setting.
Skin type Skin tone Light intensity setting
I White; You always sunburn,
never tan.
4/5
II Beige; You easily sunburn, tan
minimally.
4/5
III Light brown; You sunburn easily,
tan slowly to light brown.
4/5
IV Mid brown; You rarely sunburn,
tan easily.
3/4
V Dark brown; You rarely sunburn,
tan very easily.
You cannot use the device
VI Brownish black or darker; You
rarely or never sunburn, very
dark tanning.
You cannot use the device
Note: To check if your skin type allows usage of the device, consult the skin
tone table with number 2 on the foldout page.
Note: Your skin may react dierently on dierent days/occasions for a
number of reasons.
17
English
4222_100_4214_3_HR.indd 17 05/04/17 16:26
To Next Page
Loading...
Need help?
General
