10 Frequently asked questions
ENGLISH
5 Frequently asked questions
In this chapter you find answers to the most frequently asked questions
about your universal remote control.
How do I set the remote control for combo devices (TV/VCR,
TV/DVD, DVD/VCR, etc)?
Some combo devices require you to set up two different source selection
keys to control both parts of the combo device. For example, if you have
a TV/DVD combo, you might need to set up one code under the TV key
to control the TV and a separate code under the DVD key to control the
DVD.
The device I want to operate does not respond and the mode
key (TV or DVD) does not flash when I press a key.
Replace the old batteries with two new AAA batteries.
The device I want to operate does not respond but the mode
key (TV or DVD) does flash when a key is pressed.
Point the SRU 5120 at the device and make sure that there are no
obstructions between the SRU 5120 and the device.
The SRU 5120 does not respond properly to commands.
Try programming the SRU 5120 again.
If the device still does not respond, call our helpline.
The Text TV keys do not work.
• Find out whether your TV is equipped with Text TV.
• Maybe the SRU 5120 has to be adapted to the model of
the device. Call our helpline for details.
To Next Page
Loading...
Need help?
General
