Manual pairing
If no audio from the wireless subwoofer
can be heard, manually pair up the
subwoofer.
1 Unplug both power cables of
subwoofer and soundbar, and then
plug them in again after 3 minutes.
2 Press and hold the Pair button on the
rear of the Subwoofer for 5 seconds.
The indicator on the subwoofer will
rapidly blink.
3 Press on the soundbar or remote
control to switch on the soundbar to
enter pairing mode automatically.
4 The indicator on the subwoofer will
become solid in orange when
successful.
5 If the indicator still keeps blinking,
repeat step 1-3.
13EN
Connect to power
*
Pair up with the subwoofer
LED State Status
Fast blink Subwoofer in pairing mode
Constant on Connected / Pairing successful
Slow blink Connection / Pairing failed
Tips
Tips
• Before connecting the AC power cord,
ensure you have completed all other
connections.
• Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the unit.
1 Connect the mains cable to the AC~
socket of the unit and then into a
mains socket.
2 Connect the mains cable to the AC~
socket of the subwoofer and then into
a mains socket.
• The subwoofer should be within 6 m of the
soundbar in an open area (the closer the
better).
• Remove any objects between the subwoofer
and the soundbar.
• If the wireless connection fails again, check if
interference from an electronic device) around
interferences and repeat the above procedures.
• Do not press Pair button on the rear of the
Subwoofer, except for manual pairing.
Automatic pairing
Plug the soundbar and the subwoofer
into the mains sockets and then press on
the unit or remote control to switch the
unit to ON mode. The subwoofer and
soundbar will automatically pair.
Determine the status based on the
wireless subwoofer indicator.
Power cord quantity and plug type vary
by regions.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
