Philips TAB7207 User Manual

Main unit
The buttons on the main unit do not
work.
• Disconnect form the power supply for a
few minutes, and then connect again.
No power
• Ensure that the AC cord is properly
connected.
• Ensure that there is power at the AC
outlet.
• Press button on the remote control
or soundbar to turn the soundbar on.
19EN
6 Troubleshooting
Warning
To keep the warranty valid, never try to
repair the product yourself.
If you have problems using this
product, check the following points
before you request service. If you still
have a problem, get support at
www.philips.com/support.
• Reset this product to its factory settings
(see "Factory reset")
Distorted sound or echo.
• If you play audio from TV through this
product, make sure that the TV is
muted.
No sound from the wireless subwoofer.
• Manually connect the subwoofer to the
main unit.
• Increase the volume. Press Vol+ on the
remote control or + on the soundbar.
• When using either of the Digital input,
if there is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other
sources. Some TVs do not pass
through digital audio.
• Your TV may be set to variable audio

setting is set to FIXED or STANDARD,
not VARIABLE. Refer to your TV’s user
manual for more detailed information.
• If using Bluetooth, ensure that the
volume on your source device is turned
up and that the device is not muted.
• When the playback freezes and there is
no sound in Wi-Fi mode, please check
whether your home network is normal.
Sound
No sound from the soundbar speaker.
• Connect the audio cable from your
soundbar to your TV or other devices.
However, you do not need a separate
audio connection when:
- the soundbar and TV are connected
through HDMl ARC connection, or
- a device is connected to the HDMI in
connector on your soundbar.
• On the remote control, select the
correct audio input.
• Make sure that the soundbar is not
muted.
Bluetooth
A device cannot connect with the
soundbar.
• The device does not support the

soundbar.
• You have not enabled the Bluetooth
function of the device. See the user
manual of the device on how to enable
the function.
• Risk of electric shock. Never remove the casing of
the product.

Philips TAB7207 Specifications

General

Subwoofer type	Active subwoofer
Subwoofer included	Yes
Subwoofer connectivity	Wireless
Subwoofer frequency range	35 - 150 Hz
Audio decoders	Dolby Digital, Dolby Digital Plus
RMS rated power	520 W
Audio output channels	2.1 channels
Number of tweeter drivers	2
Total Harmonic Distortion (THD)	10 %
Bluetooth profiles	A2DP, AVRCP
Soundbar impedance	8 Ω
Soundbar frequency range	150 - 20000 Hz
Wi-Fi	No
Bluetooth version	5.0
Connectivity technology	Wired & Wireless
EasyLink	HDMI-CEC
Width (cm) outer carton	62 cm
Height (cm) outer carton	21 cm
Length (cm) outer carton	105 cm
Tare weight outer carton	4.282 kg
Net weight of outer carton	14.278 kg
Gross weight of outer carton	18.56 kg
Product color	Black
Audio formats supported	FLAC, LPCM, MP3, SBC, WAV
Cables included	AC
Number of products included	1 pc(s)
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Package depth	970 mm
Package width	460 mm
Package height	185 mm
Package weight	8640 g

Weight and Dimensions

Depth	106 mm
Width	800 mm
Height	65 mm
Soundbar weight	2100 g
Subwoofer depth	300 mm
Subwoofer width	150 mm
Subwoofer height	400 mm
Subwoofer weight	4740 g