• During play, if a call comes in,
music play pauses. Play resumes
when the call ends.
• If your Bluetooth device supports
control you can press to
skip to a track, or press to
pause/resume play.
5 To disconnect Bluetooth connection
and pair a new Bluetooth device:
press and hold the Pair/BT button
on the remote control to
disconnect Bluetooth connection
and enter pairing mode.
Through Bluetooth, connect the soundbar
with your Bluetooth device (such as an
iPad, iPhone, iPod touch, Android phone,
or laptop), and then you can listen to the
your soundbar.
What you need
• A Bluetooth device which supports
with Bluetooth version 5.0 + EDR.
• The maximum operational range
between the soundbar and a Bluetooth
device is approximately 10 meters (30
feet).
1 Press the button on the unit or
press Pair/BT button on the remote
control to switch the soundbar to
Bluetooth mode.
2 On the Bluetooth device, switch
on Bluetooth, search for and select
Philips TAB7207 to start connection
(see the user manual of the Bluetooth
device on how to enable Bluetooth).
will blink.
3 Wait until you hear the voice prompt
from the soundbar.
indicator will light up solidly.
4
your Bluetooth device.
16 EN
Bluetooth operation
/
Note
•
In an open space without obstructions,
the maximum operational range between
the soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
• Compatibility with all Bluetooth devices is not
guaranteed.
• The music streaming may be interrupted by
obstacles between the device and soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.