Philips VoiceTracer DVT2810 User Manual

3
Press the Record button to start recording.
X The recording screen is displayed.
X The Record/Status LED illuminates red.
4
Press the Record button again to stop recording.
X The recording is saved to the preselected folder.
Edit a le
You can edit existing recordings in stop mode by
appending or overwriting a recording.
Append: Add additional recording parts at the end of an
existing recording.
Overwrite: Overwrite an existing recording part starting
from any point within the recording.
To append a recording part:
In stop mode of an existing le, press the Record button.
• If the cursor of the audio progress bar is at the end
of the recording:
X The recording screen is displayed and a new
recording part is added at the end of your le.
• If the cursor of the audio progress bar is at the
beginning of the recording:
X The editing panel opens.
X Press the Up/Down buttons to select Append
and then press the Record button to conrm
your selection.
X The recording screen is displayed and a new
recording part is added at the end of your le.
To overwrite a recording part:
1
In playback mode, press the Play/Stop button to stop
playback at your desired part.
2
Press the Record button.
X The editing panel opens.
3
Press the Up/Down buttons to select Overwrite and then
press the Record button to conrm your selection.
X The recording screen is displayed and a new
recording starts from where you stopped
playback.
Tip
• If you always want to either append or overwrite a
recording part and don't want the editing panel to
open each time, press the Right function button to
open the settings panel
. Press the Down button
to navigate to Edit mode and then select Append or
Overwrite.
4 Recording
Record a le
Note
• Be careful not to cover the microphones while
recording. This might result in a lower recording
quality.
• If the recording time of your current recording exceeds
the available storage capacity, the recording will stop.
In this case, delete les from your device to make
more storage available.
Before you start recording:
• Make sure your device has enough battery power left.
When your battery is almost discharged, you will see a
battery low icon
.
X The device will turn o and your current recording
will automatically be saved.
• First select the folder you want your recording to
be saved in. For more information, see Start a new
recording. You can store 100 les in each of the folders
A, B, C, and D.
If one of the folders is full, your subsequent recordings
will automatically be stored in the next folder.
• We recommend that you make a test recording in order
to nd the most suitable presets for your recording and
achieve the best recording results.
Start a new recording
1
In stop mode, press the Left function button to start a
new recording.
X The new le mode screen is displayed.
2
Press the Right function button to open the settings
panel
.
To select a folder for your recording to be saved in.
• Press the Up/Down buttons to navigate to Folder
and then press the Record button to conrm your
selection.
Press the Up/Down buttons to navigate to the
folder you want your new recording to be saved in
and then press the Record button to conrm your
selection..
To return to the stop mode screen, press the Back
button.
To adjust the settings for your recording:
• Press the Up/Down buttons to navigate to your
desired setting and then press the Record button to
conrm your selection.
To return to the stop mode screen, press the Back
button.
10 Recording

Philips VoiceTracer DVT2810 Specifications

General

Brand	Philips
Model	VoiceTracer DVT2810
Category	Recording Equipment
Language	English