Philips VoiceTracer DVT2810 User Manual

7 Device nd dt
mngement
Transfer data to the computer
You can quickly and conveniently move les from
your VoiceTracer to your computer. Link the device
to a computer with a USB cable. Your recorder will
automatically be recognized as a mass storage device.
You don’t need to install any software.
For more information on how to connect your device to a
computer, see the illustration in Charging the battery.
Caution
• Don’t disconnect the USB cable from the device while
you are transferring les. This might cause data loss.
Note
• While the device is connected to a computer, it can’t
be operated manually.
Transfer data from VoiceTracer to the computer
1
Connect the device to the computer via the supplied USB
cable.
X A charging battery icon appears on the screen
and the Record/Status LED ashes orange for a
few seconds.
2
Open Windows Explorer on a Windows computer, or
open Finder on a Mac computer.
X Your VoiceTracer is recognized as an external
drive.
3
Double-click the VoiceTracer drive.
X The content of your VoiceTracer is displayed in a
new window.
4
Select the desired les from one of the folders and copy,
cut or drag them to the desired location on your
computer.
Reset your device and data
Device reset
If you should encounter problems with your device
software, for example, the software freezes, the device
works slowly or apps don’t respond, you can reset your
device and restart it.
1
Press and hold the reset button on the right side
of your device by using a small, pointed object, for
example, a paper clip.
2
To restart the device, slide and hold the Power switch
on the right side of the device downwards for three
seconds.
Reset data
You can format your device’s internal storage and delete
all data from your device.
Caution
• Formatting your VoiceTracer will delete all data on
your device. Before you perform a data reset, back up
any important data saved on your device.
Note
• Your menu settings won’t be deleted and are still
available after resetting the data.
To reset your data:
1
In stop mode, press the Right function button to
open the settings panel.
2
Press the Record button to select All settings.
3
Press the Right function button to enter the Device
settings.
14 Device and data management

Philips VoiceTracer DVT2810 Specifications

General

Brand	Philips
Model	VoiceTracer DVT2810
Category	Recording Equipment
Language	English