PIAGGIO Beverly Tourer 250 i.e. User Manual

Drive-belt
- Check that the driving belt is not damaged.
- Check the width of the belt.
Characteristic
250 4T Transmission belt/minimum width
19.5 mm
250 4T Transmission belt/standard width
21.3 ± 0.2 mm
During the wear checks in the scheduled servicing
programme, you are advised to check the rim bot-
tom of the toothing does not show signs of inci-
sions or cracking (see figure): The rim bottom of
the tooth must not have incisions or cracking; if it
does, replace the belt.
Removing the driving pulley
- Turn the crankshaft until the ropes of the pulley
are on a horizontal axis
- Insert the adaptor sleeve of the appropriate tool
in the hole shown in the photograph
Engine Beverly Tourer 250 i.e.
ENG - 106

PIAGGIO Beverly Tourer 250 i.e. Specifications

General

Brand	PIAGGIO
Model	Beverly Tourer 250 i.e.
Category	Scooter
Language	English