- Use new wrist pin snap rings.
- Use new cylinder base gasket.
- Before refitting carefully clean all the surfaces.
- Use oil to be mixed during the fitting of the piston
and the cylinder.
CAUTION
POSITION THE ARROW PRINTED ON THE PISTON
CROWN TOWARDS THE EXHAUST OPENING.
THE WRIST PIN SNAP RINGS MUST BE POSITIONED ON
THE PISTON WITH THE SPECIFIC TOOL
Recommended products
AGIP CITY TEC 2T Oil
Recommended oil
Engine Liberty 50 Catalyzed
ENG - 82
To Next Page
Loading...
Need help?
General