Fuel tank
• Remove the helmet compartment central cover.
• Undo the front and rear screws on the chassis
right side.
• Disconnect the breather pipe and remove the
float.
See also
Frame central cover
Front mudguard
• With the front wheel mounted, remove the fork
from the vehicle.
• Unscrew the 3 fixing screws and remove them.
• Slide off the odometer transmission and the
brake pipes, and then remove the mudguard.
N.B.
N.B. UPON REFITTING, BE CAREFUL TO PLACE THE 2
METAL CABLE GROMMETS CORRECTLY SO THAT THERE
IS NO RUBBING AGAINST THE WHEEL.
Chassis Liberty 50 Catalyzed
CHAS - 116
To Next Page
Loading...
Need help?
General