01_15
Light switch (01_15)
When the light switch «H» is set to «0», the low-beam light is on. When set to «1»,
the high-beam light is activated. If the light switch «H» is pressed when set to «2», the
high-beam light flashing is activated. The switch goes back to «0» automatically.
01_16
Emergency flashing light button (01_16)
It enables the activation of the four turn indicators simultaneously. The control «D»
can be enabled only with the key set to «ON», but once enabled, it keeps functioning
even if the key is set to «OFF» or «LOCK». To disable this function, simply turn the
ignition switch to «ON».
17
To Next Page
Loading...
Need help?
General
