Air filter cleaning
1. Wash the sponge with water and neutral soap.
2. Dry it with a clean cloth and small blasts of compressed air.
3. Impregnate the sponge with a mixture of 50% petrol and 50% specified oil.
4. Gently squeeze the filter element, let it drip and then refit it.
CAUTION
IF THE VEHICLE IS USED ON DUSTY ROADS IT IS NECESSARY TO CARRY OUT
MAINTENANCE CHECKS OF THE AIR FILTER MORE OFTEN TO AVOID DAM-
AGING THE ENGINE.
Recommended products
AGIP FILTER OIL
Oil for air filter sponge
Mineral oil with specific additives for increased adhesiveness
03_18
Cooling fluid level (03_18, 03_19, 03_20, 03_21, 03_22)
Engine cooling is carried out by a forced-circulation coolant system. The cooling circuit
holds coolant consisting of a mixture of 50% de-ionised water and 50% glycol ethyl-
ene-based antifreeze solution with corrosion inhibitors. Recommended coolant: sup-
plied with the vehicle, already mixed and ready for use. For proper engine functioning,
the coolant temperature must be between the 4th and 7th lit segment, as indicated by
the instrument «D» on the digital instrument panel. When the 9th segment lights up,
the icon and all the segments start flashing; stop the engine, let it cool down and check
the fluid level; if the level is OK, contact an Authorised Service Centre.
Check coolant when the engine is cold as indicated in the scheduled maintenance
table.
56
To Next Page
Loading...
Need help?
General
