03_19
03_20
03_21
1. Rest the vehicle upright on the stand and remove the screw of the expansion tank
cap shown in the photograph.
2. Remove the expansion tank cover «A» by turning it anticlockwise.
3. Look inside the expansion tank and check that the reference tongue «C» is covered.
4. If the coolant level is near the minimum mark, top up when the engine is cold.
If it is necessary to top-up the coolant frequently, or if the expansion tank is completely
dry, you should look for the cause in the cooling system. It is therefore essential to
have the cooling system checked at an Authorised Service Centre. Replace coolant
as indicated in the scheduled maintenance table. Take your vehicle to an Authorised
Service Centre for this operation.
N.B.
SHOULD THE 9th SEGMENT OF THE COOLANT TEMPERATURE INDICATOR
COME ON DURING A NON-DEMANDING RIDE, SHUT OFF THE ENGINE AND LET
IT COOL DOWN. THEN CHECK THE COOLANT LEVEL; IF THE LEVEL IS OK,
CONTACT AN AUTHORISED SERVICE CENTRE.
WARNING
TO AVOID THE RISK OF SCALDING, DO NOT UNSCREW THE EXPANSION
TANK COVER WHILE THE ENGINE IS STILL HOT.
WARNING
TO PREVENT AVOID HARMFUL FLUID LEAKAGE WHILE RIDING, ENSURE
THAT THE LEVEL NEVER EXCEEDS THE MAXIMUM VALUE.
TO ENSURE CORRECT ENGINE OPERATION, KEEP THE RADIATOR GRILLE
CLEAN.
57
To Next Page
Loading...
Need help?
General
