03_14
•
Remove the spark plug cover and insert the box-spanner with the appropriate
leverage for the removal.
03_15
•
Remove the spark plug.
•
When refitting, place the spark plug into the hole at the required angle and
finger tighten it as far as it will go. Use the wrench only to tighten it.
•
Cover the spark plug completely with its cap, making sure it is back in the
retainer.
N.B.
USE OF SPARK PLUGS OTHER THAN THE INDICATED TYPE OR UNSHIELDED
SPARK PLUG CAPS CAN LEAD TO FAULTS IN THE VEHICLE 'S ELECTRICAL
SYSTEM.
WARNING
SPARK PLUG MUST BE REMOVED WHEN THE ENGINE IS COLD. REPLACE
THE SPARK PLUG AS INDICATED IN THE SCHEDULED MAINTENANCE TABLE.
THE USE OF ELECTRONIC CENTRAL UNITS AND OF NON-COMPLIANT ELEC-
TRONIC IGNITIONS OR SPARK PLUGS OTHER THAN THOSE PRESCRIBED
MAY SERIOUSLY DAMAGE THE ENGINE.
54
To Next Page
Loading...
Need help?
General
