EasyManuals Logo
Home>PIAGGIO>Scooter>ZIP 100 4T

PIAGGIO ZIP 100 4T User Manual

PIAGGIO ZIP 100 4T
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Engineoiltop-up
Always check oil level before carrying out top-ups and add oil without exceeding the
MAX level. An engine oil check-up and top-up should be carried out every 3,000 km
at an Authorised Piaggio Service Centre.
03_03
Engineoilchange (03_03)
Change oil and clean the filter after every 6,000 km at an Authorised Service Cen-
tre. Empty the engine by draining the oil through drainage cap «C» with a cold engine.
First unscrew the cap-dipstick used to check engine oil level, then cap «C» and take
out the mesh filter. After cleaning and mounting again the mesh filter, screw cap «C»
and fill with oil the hole of the cap-dipstick used to check engine oil level. Then start
the vehicle, leave it running for a few minutes and switch it off: 5 minutes later check
oil level and, if necessary, add oil without exceeding the MAX level. Only use new
oil of the recommend type for oil top-ups and change.
CAUTION
USED OILS CONTAIN SUBSTANCES HARMFUL TO THE ENVIRONMENT. FOR
OIL CHANGE, CONTACT AN AUTHORISED SERVICE CENTRE WHICH IS EQUIP-
PED TO DISPOSE OF USED OILS IN AN ENVIRONMENTALLY FRIENDLY AND
LEGAL WAY.
Recommended products
eni i-Ride PG 5W-40
Synthetic based lubricant for high-performance four-stroke engines.
JASO MA, MA2 - API SL - ACEA A3
27
3 Maintenance

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PIAGGIO ZIP 100 4T and is the answer not in the manual?

PIAGGIO ZIP 100 4T Specifications

General IconGeneral
BrandPIAGGIO
ModelZIP 100 4T
CategoryScooter
LanguageEnglish

Related product manuals