Sparkplugdismantlement (03_08)
Remove the 3 screws «A», and the hatch too «B» sliding it upwards. Loosen the spark
plug HV wire and remove the spark plugs with the box-spanners.
When refitting the plug, tighten it by hand, being sure to insert it at the right angle; Use
the wrench only to fasten it. When refitting the hatch, follow the procedure in the re-
verse order, taking care that the teeth are introduced into the corresponding places
on the upper cover.
WARNING
THE SPARK PLUG MUST BE REMOVED WHEN THE ENGINE IS COLD. THE USE
OF A SPARK PLUG WITH THERMAL GRADE OR THREAD OTHER THAN THE
INDICATED TYPE (SEE «DATA» SECTION) CAN SERIOUSLY DAMAGE THE EN-
GINE. REPLACE SPARK PLUGS AT THE INTERVALS INDICATED IN THE
SCHEDULED MAINTENANCE TABLE.
Characteristic
Spark plug
NGK CR8EB
03_08
Version 50 4T
Characteristic
Alternative spark plug
DENSO U24ESR-NB
30
To Next Page
Loading...
Need help?
General