26
A-607R
8.2 FRONT PANEL
1 POWER ( OFF/ ON) switch
Press to turn power to the unit ON and OFF.
2 STANDBY/ON switch/indicator
This is the switch for electric power.
This switch does not function unless the POWER OFF/
ON switch is set to ON.
ON : When set to the ON position, power is supplied
and the unit becomes operational.
STANDBY : When set to the STANDBY position, the main
power flow is cut and the unit is no longer fully
operational. A minute flow of power feeds the unit
to maintain operation readiness.
When the STANDBY indicator lights, the unit is
in STANDBY.
NOTE:
When performing timer recording with this unit, be sure to set
the POWER and STANDBY/ON switch to ON.
3 Remote control sensor window
4 VOLUME control
Use to adjust the volume level.
NOTE:
The TONE effect functions regardless of volume levels.
5 MUTING button/indicator
Use to temporarily lower sound volume.
On : The VOLUME indicator flashes. The sound volume is low-
ered to one-tenth (–20dB).
Off : The VOLUME indicator lights. The sound will return to its
previous volume.
6 INPUT SELECTOR knob/indicators
Turn the knob clockwise or counterclockwise so that the indica-
tor lights for your desired input source. Turning the knob clock-
wise causes the lit indicator to right. Turning counterclockwise
causes it to left.
CD : For compact disc playback with a CD player.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable.
LINE : Set to this position when listening to a program
from a component connected to the LINE ter-
minals.
TAPE 1/MD : For playback with a cassette deck or MD re-
corder connected to the TAPE 1/MD terminals.
7 TAPE 2 MONITOR button/indicator
Use when there is an adaptor component (graphic equalizer,
etc.) or cassette deck connected to the TAPE 2 MONITOR ter-
minals.
Off : Indicator goes out when not in use.
On : Indicator lights when using the adaptor component or
listening to the cassette deck.
NOTE:
When no connections are made to the TAPE 2 MONITOR ter-
minals, or when they are not in use, be sure to set this switch to
the off position. (No sound will be heard if it is set to the on
position.)
1
2
3
4
56
7
8
9
0
-
=
!
~
@
VOLUME indicator
Î
STEREO AMPLIFIER
STANDBY/ON
STANDBY
OFF ON
POWER
A SPEAKERS B BASS TREBLE
PHONES
LOUDNESS
MIN MAX
VOLUME
DIRECT
BALANCE INPUT SELECTOR REC SELECTOR
CD TUNER PHONO LINE
TAPE 1
/MD
TAPE 2
MONITOR
MUTING
–20dB
CD TUNER
OFF SOURCE
L R
#
To Next Page
Loading...
Need help?
General
