Pioneer A-66X User Manual

PANEL FACILITIES
REAR PANEL
Turntable ground terminal
VIDEO 1/AUX 1 terminals
VIDEO 2/AUX 2 terminals
AUX 3 terminals
TAPE 2 terminals (REC)
TAPE 1 terminals (PLAY)
TAPE 1 terminals (REC)
TUNER terminals
CD terminals
PHONO terminals
( AC OUTLETS (SWITCHED)
Power supplied through these outlets is turned on and off
by the amplifier’s POWER switch. Total electrical power
consumption of connected equipment should not exceed
100 W.
@) AC OUTLET (UNSWITCHED)
Power flows continually to this outlet, regardless of
whether the amplifier is switched ON or OFF. Electrical
power consumption of the connected equipment should
' not exceed 100 W.
The equipment should be disconnected by removing the
mains plug from the wall socket when not in regular use,
e.g. when on vacation.
NOTE:
Do not connect appliances with high power consumption such as
heaters, irons, or television sets to the AC OUTLETS in order to
avoid overheating or fire risk.
This can cause the amplifier to malfunction.
TAPE 2 terminals (PLAY)
SPEAKERS A terminals (right channel)
SPEAKERS A terminals (left channel!)
SPEAKERS B terminals (left channel)
SPEAKERS B terminals (right channel) —
(3) Power cord
Connect
this
cord
to
a
wall
outlet,
or
the
power
outlet
of an audio timer.
About Speaker Impedance
When speaker systems are connected to only one of the
SPEAKERS
A,
B
terminals,
such
speakers
should
have
rated
impedance
in
the
range
of
6—16
ohms.
When
speakers
are
connected to both the A and B terminals, they should have
a rated impedance in the range of 12—32 ohms.

Pioneer A-66X Specifications

Power

continuous_average_power_output_per_channel	80 watts
power_requirements_HE_model	a.c. 220 V ~, 50/60 Hz
power_requirements_YP_models	a.c. 240 V ~, 50/60 Hz
power_consumption_HE_HB_YP_models	600 W
continuous_power_output_both_channels_driven	90W +90W
DIN_continuous_power_output_both_channels_driven	95W+95W

Audio Specifications

total_harmonic_distortion	0.007%
output_bandwidth_IHF	5 Hz to 45 kHz
damping_factor	60

Input Specifications

phono_MM_sensitivity_impedance	2.5 mV/50 kQ
phono_MC_sensitivity_impedance	0.2 mV/100 Q2
tuner_CD_tape_play_video_aux_sensitivity_impedance	150 mV/50 kQ2

Frequency Response

phono_MM_frequency_response	20 Hz to 20 kHz, +0.3 dB, -0.3 dB
phono_MC_frequency_response	20 Hz to 20 kHz, +0.5 dB, -0.5 dB
tuner_CD_video_aux_frequency_response	5 Hz to 100 kHz, +0 dB, -3 dB

Weight and Dimensions

dimensions_mm	420 (W) x 416 (D) x 134 (H) mm
dimensions_in	16-9/16(W) x 16-3/8(D) x 5-1/4(H) in
weight_without_package	10.9 kg/23 Ib 15 oz