6. SERVICE MODE
[1] INDICATION ITEMS FOR THE OSDS FOR DEBUGGING
Remote Control
Unit Command
Screen Indication Items for the OSDs Remarks
[ESC]+[DISP] 1st screen Service Indication (software information) Refer to “[3] SERVICE
INFORMATION DISPLAY”
Refer to “[4] OSD FILTER SETTING”
Refer to “[6] ERROR RATE
MEASUREMENT 1 AND
OK/NG JUDGMENT”
Refer to “[7] ATA/ATAPI DEBUG OSD”
Refer to “[7] ATA/ATAPI DEBUG OSD”
Refer to “[5] SELF-DIAGNOSIS
RESULT DISPLAY”
Not Used
Product serial No./destination
Model No.
Released version No.
Revision No.
Submicrocomputer version data
Drive model No.
Drive version No.
Drive serial No.
DVD-Video region No.
BD-ROM region No.
CPRM ID
MAC address
2nd screen OSD Filter
Setup value of the OSD FILTER
[ESC]+[SIDE-B] 1st screen
Specifications 1 for error rate measurement (with OK/NG judgment)
Results of error rate measurement OK/NG
[ESC]+[DISP]+[2] 1st screen
Specifications 2 for error rate measurement (for continuous playback)
Title/Chapter data
Playback duration data
LgcSct address data
Error rate data (error rate value)
[ESC]+[DISP]+[3] 1st screen ATA/ATAPI DEBUG OSD-Command history (ALL)
Packet command from the host
Error data from the status register
2nd screen ATA/ATAPI DEBUG OSD-Command history (ERROR)
Packet command that has been failed
Error Code
Command-specific information
3rd screen ATA/ATAPI DEBUG OSD-Drive maintenance data
Power ON/accumulated power-on duration
LD read power-on duration for the BD
LD read power-on duration for the DVD
Serial No. of the PU
4th screen ATA/ATAPI DEBUG OSD-Judgment of LD degradation
Judgment of degradation of the LD for the BD (OK/NG)
Judgment of degradation of the LD for the DVD (OK/NG)
Judgment of degradation of the LD for the CD (OK/NG)
Temperature inside the writer
[ESC]+[DISP]+[4] Results of self-diagnosis
Version/Revision Nos. of the SKY chip
HDMI transmitter IC check
Communication check of the submicrocomputer
PLL synthesizer check
DRIVE check
FPGA version No.
To Next Page
Loading...
Need help?
General
