Pioneer CT-W530R User Manual

RECORDING
To Stop Copying
Press
the
stop
(
@}
button
(8.
(it
will
affect
both
decks.}
@
This
function
copies
the
sound
from
deck
|
to
deck
II.
@
You
can
either
copy
the
whole
tape
at
normal
speed
while
listen-
ing
to
the
sound,
or
at
double
speed
to
reduce
recording
time
to
one-half.
@
No
recording
level
adjustment
is
required
when
copying
tapes.
@
The
deck
H!
tape
is
recorded
in
the
same
condition
of
the
deck
(
tape,
regardless
of
DOLBY
NR
switch
49
position.
For
exam-
ple,
when
copying
a
Dolby
C-type
NR
encoded
tape,
the
deck
fl
tape
is
also
recorded
with
Dolby
C-type
NR.
During
double-
speed
copy,
all
controls
become
inoperative
except
the
stop
{
@)
button
8.
During
normal-speed
copy,
the
deck
Ii
recording
mute
(
(a)
\®
and
pause
(ll)
button
©)
also
work.
TIMER
RECORDING/PLAYBACK
@
The
tape
copy
mode
is
canceled
when
the
end
of
any
one
of
the
tapes
is
reached,
so
it
is
advisable
to
use
tapes
of
the
same
length.
@
When
copying
the
same
material
several
times,
always
record
it
from
the
original
tape.
Sound
quality
will
deteriorate
if
recorded
from
a
copy.
Note on High-Speed Copy
When
performing
high-speed
copy,
an
interference
beep
might
be
recorded
if
there
is
a
TV
nearby.
In
this
case,
use
normal-speed
copy
or turn the TV power off.
TIMER RECORDING (Using only deck I)
(Unattended recording from a tuner, etc.)
1. Insert a blank tape into deck Hl.
Timer recording always begins from the forward direction.
2. Set DOLBY NR switch (0)
3. Set REV MODE selector (1.
4. Press the recording { @) button @),
5. Prepare the program source.
Set the amplifier input selector to tuner, and tune in the desired
broadcasting station.
6. Adjust the recording level.
(See page 11.)
7. Set the audio timer.
Power of all components will go off.
8. Set TIMER mode selector (1) to REC.
At the preset time, power will be turned on and recording will
start automatically.
@ Timer recording will not work if the tape deck is loaded with
a cassette whose erasure prevention tabs are removed.
@ Operation of audio timers differs depending on the model, so
consult the instruction manual of your unit.
TIMER PLAYBACK
(Wake-up playback)
1. Insert the recorded tape.
Timer
playback
always
begins
from
the
forward
direction.
Set DOLBY NR switch (0.
3. Set REV MODE selector (1).
4. Set the stereo amplifier for tape playback.
Adjust the volume level for wake-up playback.
{Check it by actually playing back the tape.)
5. Set the audio timer.
Power of all components will go off.
6. Set TIMER mode selector (1) to PLAY.
At the preset time, power will be turned on and playback wilt
start automatically.
N
@
Playback
will
be
performed
on
the
deck
having
a
tape
loaded.
@
If
cassettes
are
loaded
in
both
decks,
playback
will
start
from
deck
|,
and
continue
on
deck
{|
at
the
end
of
the
tape
{relay
playback).
@
The
biank
skip
function
will
work
during
timer
playback,
so
if
an
unrecorded
portion
continues
for
more
than
15
seconds
the
unit
will
automatically
fast-forward
the
tape
to
the
beginning
of
the
next
selection
and
resume
playback
from
there.
@
Always
set
DOLBY
NR
switch
©)
to
the
same
position
used
for
recording.
@ Operation of audio timers differs depending on the model, so
consult the instruction manual of your unit.
When
not
performing
timer
operation,
always
set
TIMER
mode
selector
@
to
the
OFF
position.
Otherwise,
recording
or
playback
might
automatically.
Start
when
turning
power
on.
12
<RRBIO58>

Pioneer CT-W530R Specifications

General

Brand	Pioneer
Model	CT-W530R
Category	Cassette Player
Language	English