5
<DRB1251>
FEATURES
BPM Sampler
Recognizes music BPM and records the set number of beats,
making loop play possible that matches the BPM of the
music being played.
BPM Counter
The auto BPM counter provided makes music tempo visible
to the eye.
Peak Level Meter
The peak level meter provided is equipped with 15-bit LED
indicators for all channels.
Fader Start/Stop
The CD player can be started or stopped simply by increasing
or decreasing the level of the cross fader or channel fader.
(This function can only be used when the Pioneer CD player
series CDJ-100S, CDJ-700S or CDJ-500
II is connected.)
The sampler can also be started with the cross fader.
3-Band Equalizer and Kill
This 3-band equalizer corresponds to the HI, MID, and LOW
channels. The attenuation level also serves as a kill function,
which can decrease the level to –26dB.
Variety of Effects
Both internal and external effects can be applied to all
channels, the microphone, and master.
A variety of effects can be enjoyed, including delay, echo,
auto pan, auto trans, filter, flanger, reverb and pitch shifter.
Enhanced Input/Output Terminals
In addition to the 10 inputs for the 2 CD, 3 LINE, 3 PHONO
(for MM only) and 2 microphone systems, outputs for 2
systems, including the pro-specification XLR output, booth
monitor output and recording output are provided
independently. SEND/RETURN terminals are also provided
for external effectors.
CHECKING ACCESSORIES CONTENTS
÷ 6 short-circuit pin plugs
These are inserted in the PHONO 1, PHONO 2, and
PHONO 3 terminals on the back.
÷ Operating instructions
÷ Warranty
CAUTIONS REGARDING HANDLING ...................... 4
Location ........................................................................... 4
Condensation .................................................................. 4
Cleaning the Unit ............................................................ 4
FEATURES ................................................................. 5
CHECKING ACCESSORIES ....................................... 5
CONNECTIONS ......................................................... 6
PART NAMES AND FUNCTIONS ............................. 8
USING THE EFFECT/SAMPLER FUNCTIONS ....... 12
Features of Various Effectors ....................................... 12
Measuring BPM ............................................................ 14
Delay, Echo, Auto Pan, Auto Trans, Filter,
and Flanger Operations ................................................. 16
Operating Reverb and Pitch Shifter .............................. 18
Using an External Effector ............................................ 19
Using Sampler Recording ............................................. 20
Using Sampler Playback Functions ............................... 21
Using Sampler Edit Function ........................................ 21
USING THE FADER START FUNCTION ................ 22
Starting with the Channel Fader ................................... 23
Starting with the Cross Fader ....................................... 23
TROUBLESHOOTING .............................................. 24
SPECIFICATIONS .................................................... 25
To Next Page
Loading...
Need help?
General
