Pioneer GM-222 User Manual

15
GM-222
7. GENERAL INFORMATION
7.1 DISASSEMBLY
- Removing the Case and Panel
1. Remove six screws A, and then remove case.
2. Remove panel.
- Removing the Amp Unit
Some silicone glue has been applied between the
Heat Sink and the Sub Heat Sink. therefore, to
remove the Amp Unit from the Heat Sink.
1. Remove four screws B and three screws C.
2. Use 2 pcs. of screw B and insert them into the two
holes marked with an arrow.
3. Alternately tighten them little by little until the Sub
Heat Sink separates from the Heat Sink.
A
A
B
B
C
C
Panel
Case
Sub Heat Sink
Sub Heat Sink
Heat Sink
Amp Unit
Fig. 6
Fig. 7

Pioneer GM-222 Specifications

General

Brand	Pioneer
Model	GM-222
Category	Amplifier
Language	English