Pioneer PD-101 User Manual

TO PLAY ONLY DESIRED TRACKS
Programming a pause 7
Inserting a pause in your program can be very useful when carrying
out recording. Press Hf instead of entering a track number. “PA“
appears on the display. :
e@ For example, when recording on both sides of a cassette tape,
if you program a pause after the last track to be recorded on
the first side; program playback will pause at that point to allow
you to switch tape sides. To resume program playback after the
player enters pause mode, press Il. |
NOTES:
e A pause can be programmed only when the program procedure
is performed under stop mode.
e A pause cannot be programmed at the beginning of a program,
nor can two pauses be programmed one after the other.
e@ A pause inserted in a program is counted as one step.
e if a pause is programmed as the last step of a program, the
player will not enter the pause mode.
To clear all of the program contents
® | cross
® During stop mode, press Ml.
When the disc tray is ejected, the program contents will be
cleared.
To erase a program
jlels ,LeI1-
During program mode, press CLEAR.
The last program step is erased and the contents of the previous
program step are displayed.
NOTE:
Contents of a program can be erased during playback as well.
However, tracks preceding the currently playing track cannot be
erased in this way.
CONVENIENT OPERATION FOR RECORDING
CHECK
CHECK
1. With the player in the program stop mode, press CHECK.
@ Eachtime the buttonis pressed, the programmed tracks will be
displayed in the order they were programmed.
After confirming the last program step, the track number display
will show “00”.
When CHECK is pressed again, the display will return to that
shown in step 1.
| To modify the program contents |
CHECK
YS Br
GQ BN
1. Press CHECK so that the program step to be corrected appears on
the display. :
2. Enter the new track No. with the digit buttons. For example, the
programmed track No. 3 in step 2 is changed to track No. 7, using
the [7] button.
e Repeat steps 1 and 2 to change other tracks as desired.
After approx. 1 second
10
<PRB1159>
En
With this function, tracks are automatically programmed for both
sides of the tape.
COMPU PROGRAM EDIT
The player automatically rearranges the order in which tracks are
played back so that their total playing time becomes the specified
playing time as near as possible.
AUTO PROGRAM EDIT
Tracks are selected within the designated time, starting from the first
track and progressing in order.
1 Select the Compu Program Edit mode or Auto
Program Edit mode with COMPU/AUTO EDIT.
To enter the Compu Program Edit mode: Press the button
once. “COMPU” appears on the display. After approximately 1
second “TIME?” appears on the display.
To enter the Auto Program Edit mode: Press the button twice.
“AUTO” appears on the display. After approximately 1 second
“TIME?” appears on the display. |

Pioneer PD-101 Specifications

General

Brand	Pioneer
Model	PD-101
Category	CD Player
Language	English