Listening to music contents of a
Bluetooth wireless technology
device with your system
1 Press ADPT on the remote control to
switch the receiver to ADAPTER PORT
input.
! The ADAPTER PORT input can also be
selected by pressing SOUND RETRIEVER AIR
on the receiver. In this case, the optimum
listening mode (SOUND RETRIEVER AIR) is
selected automatically.
! When the Bluetooth ADAPTER is not plugged
into the ADAPTER PORT, NO ADAPTER
will be displayed if ADAPTER PORT input is
selected.
2 From the Bluetooth wireless
technology device, perform the operation
to connect to the Bluetooth ADAPTER.
3 Start playback of music contents stored
on the Bluetooth wireless technology
device.
This receiver’s remote control buttons can
be used for basic playback of files stored on
Bluetooth wireless technology devices.
! Bluetooth wireless technology device should
be compatible with AVRCP profile.
! Depending on the Bluetooth wireless
technology device you use, operation may
differ from what is shown in the remote
control buttons.
TV
/
DTV MPX PQLS
PHASE
CTRL STATUS
PGM
MEMORY MENU
AUDIO
HDD DVD
1 322
S.RETRIEVER
2
4 While listening to a source, set the
remote control to the receiver operation
mode, then press ADV SURR repeatedly to
select SOUND RETRIEVER AIR.
The Bluetooth
®
word mark and logos are reg-
istered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Pioneer
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
En
34
05 Basic playback
To Next Page
Loading...
Need help?
General
Weight and Dimensions
