26
FEATURES
1. Jet Pump Outlet Nozzle - The nozzle is the exit for the jet output. The
orientation of the nozzle is controlled by the handlebars, and determines
the direction of craft movement.
2. Safety Lanyard Wrist Cord - The lock plate end is fastened to the
engine stop switch on the handlebar. The wrist band end is fastened to the
operator’s wrist or PFD. The engine will not start if the lanyard lock plate
and switch are not engaged. If disengaged during operation, the engine
will stop.
3. Seat Latch - The seat latch secures the seat in position. When re-
leased, it provides access to the engine compartment. NOTE: The num-
ber of latches will depend on the model. Some boats have one latch and
others have two latches.
4. Boarding Platform/Footwell Pads - The boarding platform assists
riders while boarding. The footwell pads are the place for the operator’s
and passenger’s feet while riding the watercraft.
5. Drain Plug(s) - When water gets into the bilge, it can be drained
through this plug. Remove the watercraft from the water before draining
the bilge. Be sure the plug is securely closed before launching the water-
craft.
6. Exhaust Outlet
7. Reverse Gate (shown engaged)
To Next Page
Loading...
Need help?
General
