83
MAINTENANCE AND LUBRICATION
Lubrication
Steering Nozzle Pivot Shaft
Lubricate the steering nozzle shaft
pivot connections (1).
Steering Handle Pivot Shaft
Lubricate the handle pivot shaft and
bushing (2). If the steering shaft has
loosened, tighten it.
Choke (if equipped)
Turn the choke lever and apply grease
to the knob shaft. NOTE: On some
models, the choke is located on the
console.
Seat Latch And Hooks
Grease the locking mechanism of the
seat latch at the rear of the seat opening.
Carburetor An d Oil Injection Pump
Grease springs, exposed portions of cable and s hafts at the
carburetor(s) or throttle bodies. Grease often if used in salt water.
Electrical Conn ectio n s
Apply dielectric grease to battery posts and exposed cable connections.
1
1
2
2
To Next Page
Loading...
Need help?
General
