48
OPERATION
Pre-Operation Inspection
Loose Parts
Inspect the watercraft for any loose nuts, bolts, fasteners and hoses. Be
sure that all hose clamps are tight. Replace cracked or deteriorating
hoses.
Steering Inspectio n
Check the handlebars for free
movement throughout their full
range. Make sure t he jet pump
outlet nozzle changes direction
as the handlebars are turned from
left to right and vice versa.
Be sure the handlebars and
handlebar grips fit snuggly.
Visually inspect the control cable to ensure that it’s in working
condition.
Throttle Inspection
Always check throttle operation prior to
starting t he engine.
Pull or squeeze the throttle several times to be
sure the throttle lever moves freely through its
full range. It should spring back to its original
position when released.
Engine and Storage Compartments
If the craft is operated in salt water,
we recommend that you spray
the inside of the hull (engine and
components) with waterproof
lubricant spray (PN 2871064)
after every use. The engine
compartment (1) is located
beneath the seat (2).
Be sure the seat, engine cover and front compartment door (3) are
properly positioned and securely latched before operating the
watercraft.
1
2
3
To Next Page
Loading...
Need help?
General
