81
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
DESCRIPTION
Pre-ride Pre-
season
Monthly
or
25 hrs.
3mos.
or
50 hrs.
6mos.
or
100 hrs.
Tune up
item
ELECTRICAL (cont.)
Engine overheat warning/
tone/electrical connections
I I
Lanyard cord/engine stop
switch
I I •
HULL / DECK / STEERING / CONTROLS
Steering support hub bush-
ings/fasteners/handgrips
I/L I/L •
Steering cable I/L/A I/L •
Steering Nozzle Bushings I R
Reverse cable inspection, lu-
brication
I I/L/A I/L/A
Handlebar/ st eering operation
( t ur ns fully/ fr eely/ fastener s)
I I •
Hull, clean and inspect for
cracks, damage, or leaks
I C/I
Drain Plug Condition I I •
Bilge system inspection,
should not leak
I I I
Seat and compartment seals
(condition of seal)
I/A I/A •
Fire extinguisher I I •
Inspect and tighten all fas-
teners, including carburetor
mounts engine mounts, ex-
haust system, all hose
clamps; inspect muffler, bat-
tery, oil and fuel tank fasten-
ing devices, pump, steering
fasteners. Aggressive riding
requires more frequent ser-
vice.
I I •
I - Inspect, adjust, service, or replace if necessary
A-Adjust
C - Clean
R - Replace item
L - Lubricate with recommended lubricant