31
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 20
60
Brake fluid Ensure proper level 60
Park gear Ensure vehicle does not roll when in PARK. Ensure
PARK light illuminates.
-
Front suspension Inspect, lubricate if necessary 45
Rear suspension Inspect, lubricate if necessary 45
Steering Ensure free operation 61
Tires Inspect condition and pressure 8
62
Wheels/fasteners Inspect, ensure fastener tightness 62
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 20
46
Coolant level Ensure proper level 53
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 59
Indicator lights/switches Ensure operation 19
Air filter, pre-filter Inspect, clean 57
Air box sediment tube Drain deposits whenever visible 57
Headlamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
64
Brake light/tail lamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
65
Seat Belts Check length of belt for damage, check latches for
proper operation
21
Cab Nets Check for wear or damage, ensure proper installation 22
To Next Page
Loading...
Need help?
General
